Performance: This product is a broad-spectrum, non oxidizing and highly water-soluble bactericide, which can effectively kill and inhibit the growth of bacteria, fungi and algae everywhere in the water system, quickly penetrate the biofilm attached to the surface of system equipment, and effectively control the microorganisms under the biofilm. This product has the advantages of low dosage, good water solubility, no pollution to the membrane, easy degradation and so on.

Usage: This product is suitable for sterilization of various membrane material systems.

Dosing shall be conducted once every 1 to 2 weeks, with the dosage of 5 ~ 10ppm and the dosing time of 30 to 120 minutes. During metering, the flow of dosing pump shall be adjusted according to the above two points.

Quality index:

instructions:

Dilution method: please use desalted water to dilute the product more than 10 times before adding.

Dosing point: in order to fully mix the chemicals, the dosing point shall be selected before the security filter.

Dosage calculation: dosage of bactericide = influent flow × Dosing concentration

Packing: 25kg plastic barrel.

Storage: store in a closed place to prevent exposure to the sun. Store in a ventilated and dry place for 10 months.

Precautions: This product is an biocide, which will cause injury in contact with skin. When using, strengthen labor protection and wear gloves. In case of accidental contact with skin, wash with a large amount of water for more than 15min. In serious cases, seek medical treatment.